Many of us buy glasses online, for ourselves or as a gift, and never more than around Black Friday and Christmas. The one thing a screen can't show you is how a frame will sit on a face. The good news: almost every pair carries a small code that does most of the work for you. Once you know how to read it, choosing the right size online gets much easier.
Where to find the numbers
Take a pair of glasses or sunglasses you already own and look at the inside of one of the arms (the temples). On most frames you'll see three numbers, written something like 50-19-140 or 50□19 140. On some frames they sit on the inside of the bridge instead. You may also see a model name, a colour code or a CE mark next to them; you can ignore those for sizing. All three measurements are in millimetres.
What the three numbers mean
1. Lens width (e.g. 50)
The first number is the horizontal width of one lens at its widest point. It has the biggest influence on how wide the frame looks on your face. Most adult frames fall somewhere between about 45 and 58 mm.
2. Bridge width (e.g. 19)
The second number is the gap between the two lenses, the part that rests on your nose. The small square symbol you sometimes see between the first two numbers simply comes from the standard way lenses are measured; it just separates the two values. A bridge that is too narrow pinches and pushes the frame up; one that is too wide lets the glasses slide down your nose. Typical bridges range from roughly 14 to 24 mm.
3. Temple length (e.g. 140)
The third number is the length of the arm, from the hinge to the tip that curves behind your ear. Most adult frames use 135, 140, 145 or 150 mm. Arms that are too short press behind the ears; arms that are too long won't hold the frame in place.
A quick way to estimate total frame width
Double the lens width and add the bridge, and you have a rough idea of the width of the front of the frame. Then add a few millimetres for the rims and hinges. A 50-19-140 frame works out at around 119 mm before the rims are counted. Compare that with a pair that already fits you well and you'll know straight away whether a new frame will feel bigger or smaller.
How to find your size
Start with a pair that fits
The most reliable method is also the simplest: find the numbers on glasses or sunglasses you already enjoy wearing and use them as your reference. Look for new frames within two or three millimetres on lens width and bridge, with the same or a similar temple length.
No numbers? Measure an old pair
If the print has worn off, lay the glasses flat and use a ruler. Measure one lens across its widest point, then the gap between the lenses, then the arm from hinge to tip, following its curve as best you can.
No reference pair at all? Measure your face
Stand in front of a mirror and hold a ruler horizontally just below your eyes. Measure from temple to temple, the flat area just beside each eye. That gives you a rough idea of the total frame width that will suit you, which you can compare with the estimate above.
Rough size bands
| Size | Lens width | Often suits |
|---|---|---|
| Narrow | up to 49 mm | smaller faces |
| Medium | 50 to 53 mm | most faces |
| Wide | 54 mm and above | broader faces, or a deliberately oversized look |
Treat these bands as a guide, not a rule. Frame shape, rim thickness and lens curve all change how a size feels once it's on. If you're on the narrow side, see our guide to sunglasses for small faces.
Signs a frame fits well
- Your eyes sit roughly in the middle of each lens, side to side.
- The frame isn't much wider than your face and doesn't press on your temples.
- The bridge rests on your nose without pinching or leaving deep marks.
- The glasses stay in place when you look down or smile.
- The arms curve gently behind your ears without sore spots.
Sunglasses can sit a little larger than everyday glasses, since extra coverage helps keep out light from the sides, but bridge and temple fit matter just as much.
Reading the numbers on lavunett frames
Every lavunett product page lists the frame measurements in the same lens–bridge–temple format, so you can compare them with a pair you already own before you order. A few examples:
- Malcolm, round sunglasses in black acetate: 47-20-140. A narrower fit that suits smaller faces.
- Cray, square sunglasses in tortoiseshell acetate: 50-19-140. A medium width that's comfortable on most faces.
- Pacho, square metal sunglasses: 54-16-145. A wider frame with a narrow bridge.
- Sheeran, a round black acetate blue light frame: 47-22-145. Narrow lenses with a slightly roomier bridge and longer arms.
Our acetate sunglasses come with polarised UV400 lenses, while our metal sunglasses have classic tinted lenses. Our acetate blue light frames can be ordered with a blue-light filter or with reading lenses as lens options. Browse the full sunglasses and blue light glasses collections and check the measurements on each product page. Once you know your size, our guide to choosing sunglasses for your face shape will help you narrow down the style, and our style quiz takes both your face size and shape into account.
Buying glasses as a gift?
Size is the trickiest part of giving eyewear. The easiest trick is a discreet look at the numbers on a pair they already wear. If that isn't possible, a medium width of 50 to 53 mm is the safest bet for most adults. Our frames are €59 (€74 with the blue-light filter) and every pair arrives in a gift box with a leather pouch and a microfibre cloth. Shipping is free in the EU (5–8 business days) and €10 outside the EU (5–15 business days), and you have 14 days to return a pair. For ideas, see our gift guides for him and for her.
FAQ
What does 52-18-145 mean on glasses? It means a lens width of 52 mm, a bridge width of 18 mm and a temple (arm) length of 145 mm. In other words, a medium-width frame with a fairly narrow bridge and long arms.
Are sunglasses sized the same way as glasses? Yes. Sunglasses use the same three measurements in the same order, so you can compare a sunglass frame directly with your everyday glasses.
How much difference do a few millimetres make? Two or three millimetres of lens width is noticeable but usually comfortable either way. The bridge is more sensitive: a couple of millimetres can be the difference between a frame that stays put and one that slips or pinches.
Do these numbers tell me which reading strength I need? No. They describe the frame only. A reading strength such as +1.5 is a separate measurement of the lenses themselves; our reading glasses strength guide explains how to choose one. If your vision has changed, see an optician.